How to alter a fuel filter in small engines?

Quick Links:

  • Where Is My Fuel Filter Located?
  • Finding the Right Fuel Filter
  • How to Perform Fuel Filter Replacement

Why Should Yous Change the Fuel Filter?

There are many benefits to changing a fuel filter in your modest engine. A fuel filter is designed to properly strain the gas before it reaches the carburetor in your lawn mower, snowfall blower or equipment.

Fuel filter replacement is of import considering:

  • It prevents strange particles from clogging your engine
  • Dirty fuel filters tin can cause your engine to run too lean, leading to diminished functioning and uneven operation

Where is My Fuel Filter Located?

The fuel filter will exist located either inside the fuel tank or fitted into the fuel line between the tank and the fuel pump. Some engines have internal, non-serviceable fuel filters.

If you lot are unsure of where your fuel filter is located, refer to your Briggs & Stratton® Engine Operator's transmission to make up one's mind the location.

Finding the Correct Fuel Filter for Your Small Engine

The proper fuel filter for your engine depends on the engine'southward pattern. Bank check your engine Illustrated Parts List or consult your local Briggs & Stratton dealer for the right replacement filter. Once y'all know the correct part, you lot can buy Briggs & Stratton® fuel filters online.

How to Perform Fuel Filter Replacement

Make sure you are in a safe area with no open flame or fire source. Clothing safety eyewear whenever removing or inspecting a filter to protect your eyes from liquid fuel or fuel vapors. Have a dry out cloth handy to concord the filter and take hold of any dripping fuel.

If the filter is installed inside the tank, yous will need to bleed the tank before yous can remove the filter for inspection or replacement.

  1. Shut the fuel valve, if equipped. It'due south located at the base of the fuel tank, where the gas line is attached. If your tank is not equipped with a valve, clamp the gas line, using a fuel line clamp. Exercise not pinch fuel line as this could cause damage to it.

  2. If your filter is installed in the fuel line, remove the metal clips on each side of the filter, using needle nose pliers, and slide the filter out of the fuel line.

  3. Shake the filter over a make clean cloth to displace whatever remaining fuel, and then use the cloth to wipe abroad any residue from the exterior of the filter.

  4. Go along the filter a safe distance from your face and look through one end.

  5. You lot should be able to see lite shining through clearly from the other side. If debris is clogging the mesh screen, pleated paper or the inside of the casing, replace the old filter with a new replacement fuel filter.

  6. When replacing the fuel filter, exist sure to reconnect the metal clips on both sides of the filter.

  7. Remove the clamp on the fuel line or reopen the fuel valve when the fuel filter is secure.

  8. Check for leaks. Do not operate the unit if any are found.

Note: If the fuel line is cracking, supersede fuel line to ensure no leaks, fuel line will pause downwards over time due to the elements.

Alert: Always read the engine and equipment manual(s) earlier starting, operating, or servicing your engine or equipment to avoid personal injury or property damage. See an authorized dealer if you are unsure of any procedure or have additional questions.

Store Related Maintenance Parts